The Wismec Reuleaux RX Mini 80W Mod has an internal battery and packs 2100mAh. It has a compacted chassis and follows in the line of the RX family. It has an output wattage of 80W and supports temperature control mode. This mod has a resistance range of 0.1 to 3.5ohms. It also features a vibrant OLED Screen with the Vertical arrangement and shows output voltage, wattage, and temperature.
Introducing the all new RXmini 80w by Wismec and Jaybo! With the success of the previous RX Reuleaux devices, its only natural for Wismec to produce a tiny version for us! The Wismec RXmini is a fashionable and very small box mod with all the capabilities and options that your looking for in a device while maintaining an ultra small and portable form factor! The RXmini contains an internal battery that is rated at 2100mAh which is more than enough to power your device for the day. Wismec includes a USB cable with this package and you can charge your device by plugging into the usb port on the display side of your box mod. RXmini has a new Preheat feature which is a nice function that warms your coil quickly by using a higher wattage and Wismec states that this function may prolong the life of your coil. This new device will accomodate many tanks and atomizers with its standard 510 connector. An atomizer resistance of 0.05-1.5ohm is required for TC modes and a range of 0.1-3.5ohm is required for the VW/Bypass modes.
The RXmini has all of your favorite functions including temperature control and VW mode as well as Bypass and TCR modes for your custom wire configurations. Wismec has designed the RXmini with convenience and performance in mind and even though the RXmini has all of these functions, it is still an ideal device for a beginner or advanced user! All of this functionality and power is included for everyone to use no matter your level of expertise! Wismec includes all of the necessary components and parts that are needed to begin using your device straight out of the box. Leather stickers are included with your device so you can customize the look and feel of your new RXmini 80w! Upgrades to the RXmini firmware are possible by visiting the Wismec website and searching for an associated upgrade. A Reset button is embedded into the RXmini and can be activated from underneath the device by inserting a pin or paper clip into the small reset button port. This function can be convenient if the RXmini hangs during an upgrade.